Bill of Materials for the Pi Eye Kit
The Pi Eye Kit does not include the Raspberry Pi, Camera or Power Supply. It does not include the Sense-Hat, Sense-Hat GPIO Extender, Mounting Stand or HDMI cable. It does not include an artistic “skin” covering.
Included in the kit:
1 Plastic Globe 156 mm. diameter
1 Main Support Plate 152 mm. diameter
4 Raspberry Pi Mounting Screws M2.5 x 12mm
4 Raspberry Pi Mounting Lock Nuts M2.5
4 Raspberry Pi Mounting Spacers M3 x 5mm OD x 3mm L
2 Camera Mounting Screws M2 x 16mm
2 Camera Mounting Nuts M2
2 Camera Mounting Spacers M3 x 5mm OD x 3mm L
1 Stepper Motor Controller Board
4 Motor Controller Mounting Screws M2.5 x 12mm
4 Motor Controller Mounting Lock Nuts M2.5
4 Motor Controller Mounting Spacers M3 x 5mm OD x 3mm L
6 Motor Controller Wire Connectors F-F 6″
2 Motor Controller Wire Cable Ties
1 Camera Mount Block 10mm x 10mm x 40mm
2 Plate Mounting Block 10mm x 10mm x 30mm
4 Mounting Block Screws
1 Motor Mounting Plate 68 mm. diameter
1 Stepper Motor
2 Stepper Motor Mounting Screws M4 x 10mm
2 Stepper Motor Mounting Nuts M4
1 Stepper Motor Shaft Coupler
2 Motor Shaft Coupler Set Screws
You will also need some tools and supplies to finish this kit: a drill and rotary tool, metric hex wrenches, acrylic epoxy, gloss black enamel (optional), mounting stand with hardware.